ModelCraft MC SPort - User Manual


 3-Kanal-Fernsteueranlage
„MC Sport“ 40MHz FM
 3 Channel Remote Control System
„MC Sport“ 40MHz FM
 Radiocommande 3 canaux
« MC Sport » 40MHz FM
 3-kanaals afstandsbediening
„MC Sport“ 40MHz FM
Best.-Nr. / Item no. / N° de commande / Bestnr.: 20 51 00
 Bedienungsanleitung Seite 2 - 31
 Operating Instructions Page 32 - 61
 Notice d’Emploi Page 62 - 91
 Gebruiksaanwijzing Pagina 92 - 121
Version 08/08

ModelCraft MC SPort Specifications

General

Brand	ModelCraft
Model	MC SPort
Category	Remote Control
Language	English

Summary

Introduction

Intended Use

Product Description

Delivery Content

Symbol Explanation

Safety Instructions

General Safety Information

Product safety, age limits, and electrical connection guidelines.

Operational Safety Guidelines

Safe handling, environmental factors, and operational precautions for the remote control system.

Battery and Accumulator Information

Charging the Battery

Transmitter Controls Overview

Getting Started with the Transmitter

Inserting Batteries

Procedure for installing batteries or rechargeable batteries into the transmitter.

Charging Rechargeable Batteries

Instructions for charging rechargeable batteries via the transmitter's charging socket.

Switching On the Transmitter

Steps for powering on the transmitter and checking battery status.

Commissioning the Receiver

Connecting the Receiver

Guide to connecting servos and power supply to the receiver unit.

Mounting the Receiver

Recommendations for installing the receiver inside the model, protecting it.

Mounting the Servos

Guidance on securely mounting servos to minimize vibration.

Checking Control Functions

Verifying proper operation of steering and drive functions after connection.

Setting Neutral Servo Positions

Adjusting digital trim to set servos to their central, neutral position (value 0).

Setting Dual Rate for Steering

Adjusting maximum steering servo deflection for channel 1 (30-100%).

Setting Dual Rate for Driving

Adjusting throttle/brake servo deflection for channel 2 (30-100%).

Mounting Servo Levers

Attaching servo levers to ensure correct rotation path and linkage alignment.

Programming the Remote Control

Selecting Model Memory

Storing and selecting individual settings for up to ten different models.

Setting Servo Rotation Direction (REV)

Reversing the operational direction of steering, drive, or auxiliary servos.

Setting Maximum Servo Turn (EPA)

Precisely determining maximum servo deflection for steering and throttle.

Setting Exponential Function (EXP)

Adjusting servo response sensitivity around the center position.

Setting ABS Function (ABS)

Optimizing braking behavior by pulsing the brake electronically.

Setting Model Name (NAME)

Assigning a custom three-character name to each model memory slot.

Fine-Tuning the Transmitter

Setting Digital Steering Trim

Precisely adjusting the steering servo's central position for straight driving.

Setting Digital Drive Trim

Adjusting the drive function's central position for motor idle or brake engagement.

Operation During Driving

Using trims and dual-rate adjustments during active model operation.

Changing the Crystal

Care and Maintenance

Disposal

General Disposal Information

Guidelines for proper disposal of the product at its end of service life.

Battery and Rechargeable Battery Disposal

Instructions for returning used batteries and rechargeable batteries for recycling.

Troubleshooting

Technical Data

Transmitter Specifications

Specifications for the transmitter, including frequency, modulation, and voltage.

Receiver Specifications

Specifications for the receiver, including frequency, modulation, and dimensions.

Declaration of Conformity (DOC)