4
• If you don’t understand the procedure of installing freestanding stove, do not hesitate to contact the MODENA
Service Center for installation procedure.
• Prepare the required supporting equipments for installation, for example:
• LPG cylinder
• Standard gas supply hose with safety leak equipment.
• Hose clamp
• Low-pressure gas regulator
• Gas lighter
• Room ventilation
The room where gas equipments are to be stored must have proper air ventilation to enable free flow of air. Any
room with inadequate ventilation system will have more emission gas molecules than the oxygen, resulting in
imperfect flammation (flame will become yellow in color due to lack of oxygen). As such, make sure that the room
where gas equipments are contained have proper ventilation.
• Prepare easily accessible electrical socket for your stove power cord.
To Next Page
Loading...