EasyManua.ls Logo

Modena WF 652 - Washing Machine Maintenance

Modena WF 652
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 29
evenly distributed in the drum, the machine will not spin. In this case, redistributed the load
manually and reselect the spin programme.
Door lock
The door will be locked in the following situations:
- When the machine is started, the door lock is locked though you press the “Start/Pause”
button.
Press the “power” button to switch off the machine and the door lock is unlocked in two
minutes.
- When the temperature inside the drum is above 53, the door lock is locked.
- When the water is above a certain level, the door lock is locked.
- When the washing cycle is finished, the door lock is unlocked after two minutes.
Important: Do not open the door when the wash cycle has not been completed or when a power
cut during the washing process is running, because the temperature inside the machine probably
still high and can cause burns.
MODENA washing machine specifically designed for long term use so that it does not require
complex treatment. However, there are some matters that are recommended to care your washing
machine so the quality of the washing machine is maintained.
Previously, make sure to:
1.Unplug the power cord from the wall socket
2. And turn off the water tap.
Clean the cabinet,
doors rubber and
washing machine
door
Cleaning The
drum
- Clean the cabinet of the washing machine regularly with a soft cloth
and wet. Then dry with a soft and dry cloth.
- Clean up all the rubber doors and door part of the washing machine
after each washing with a soft, dry cloth.
- Clean the drum every 3 months by using the “Sterilization” programme.
Cleaning Soap
Detergent
Drawer
periodically
- Clean the detergent drawer if there is a pile of
powder detergent in the drawer
- To clean it, remove the detergent drawer out
of its place by pressing the hook and pull the
drawer together from its place (a strong pull is
required in order to pass through the stopper).
- Clean the drawers by putting them under
water spray then clean it with a dry cloth. Do
not use solvents to clean.
- Use a bottle brush to remove detergent
residues inside the drawer housing.
Part 6 : Maintenace

Related product manuals