F
Manual - Bae Hawk
16 www.modster.at
Introduction
Simple is beautiful. Without any landing gear to deal with, the Arrows Hobby 50mm BAE
Hawk is lightweight and streamlined- perfect for those with a tight flying field or budget!
To minimize drag, increase flight time and guarantee the precision flight characteristics of the
BAE Hawk, Arrows Hobby designed a rigid single-piece wing structure and horizontal stabili-
zer. The lightweight airframe and exceptional aerodynamics give the 50mm jetexcellent low
speed handling and flight time – uncharacteristic for small EDF jets of its size.
Power comes courtesy of a 50mm 11-blade fan unit, 2627- 500KV brushless motor and a high
performance 30A ESC (with 3A BEC) giving unparalleled speed and sound.
In addition, Arrows Hobby takes the details a step further, with a friction-resistant tail fin on
the belly of the BAE Hawk and a steering gear protective shell on the bottom of the wings to
facilitate belly landings.
How do you get pinnacle performance on a small budget? Let Arrows Hobby work its magic
with the 50mm BAE Hawk!
Features:
• Powerful 2627-4500KV brushless motor
• Highly efficient 50mm 11 bladed EDF unit.
• Reliable, high-performance 30A ESC with 3A BEC.
• Simple lightweight design for extended flight times.
• Highly attractive trim scheme for maximum visibility in the air.
• New anti-corrosive water-based paint for better color and gloss.
• PNP with Vector system-allowing three flying modes.
• Uncompromised performance despite being budget friendly!
Specifications
Wingspan 661.5mm (26.04in)
Overall length 725mm (28.5in)
Flying weight ~ 475g
Motor size Brushless 2627-KV4500
Wing load 55.2g/dm
Wing area 8.6dm
ESC 30A
Servo 9g Servo x 3
Recommended battery 11.1V 1300mAh 30C
To Next Page
Loading...
