Modulus COMP-U-DIFF 10-329 - Clearing Data from Memory; Clearing Selective Data; Clearing All Records

13
CLEAR OPERATIONS
CLEARING SELECTIVE DATA FROM MEMORY
1. Press the [MODE] key to access the RECALL mode.
2. Select the desired record to be erased.
3. Press the [CLEAR] key.
All data associated with the specimen will be set to zero and
the COMP-U-DIFF will advance and display the next specimen record.
Note that a cleared memory location will be automatically reused during the next specimen
STORE operation.
CLEARING ALL RECORD FROM MEMORY
1. Press the [MODE] key to access the BATCH mode.
2. Press the [CLEAR] key.
Preparatory to clearing memory, the unit will display the following message:
Press [CLEAR] to erase
Press [MODE] to EXIT
3. Press the [CLEAR] key a second time (a fail-safe procedure to avoid erroneous
purging of the memory.) The memory will clear and the unit will return to the Specimen
entry form in the STORE mode.