43
06/99 AWB 2528-1316 GB
3 “easy” Interface Socket
The “easy” interface socket, which is hidden beneath
a protective cap, lets you plug in the optional “easy”
memory card or connect “easy” to a PC using the
optional PC interface cable and the EASY-SOFT
software. You can then copy your circuit diagrams to
and from the PC and/or memory card. In addition you
can draw and test your circuit diagrams on the PC
before transferring them to “easy”.
Memory card
Memory cards are available as the optional accessory
“easy-M-..K”. Each memory card can store a single
“easy” circuit diagram.
Information stored on the memory card is “non-volatile”
(the information is not lost when the power is switched
off), and thus you can use the card to make a backup
copy of your circuit diagram and/or to transfer it to
another “easy” device.
Each memory card stores:
the circuit diagram
all parameter settings of the circuit diagram
system settings
2
1
2
1
easy-M-16K
For Immediate Delivery call KMParts.com at (866) 595-9616
To Next Page
Loading...
