1-13
01/00 AWB27-1239-GB
General
3 Installation
Inserting and
removing cards
Inserting cards
왘 Insert the card into any slot of the rack to the right
of the power supply PS416-CPU-4x0 or the
SUCOnet K card PS416-NET-400.
The card requires one slot.
왘 Press the lever and insert the card into the rack
until you hear a click.
왘 Plug in the connection plug.
Removing
왘 Remove the connection plug.
왘 Press the lever to release the locking mechanism.
왘 Pull the card forward.
Note
The PLC must be disconnected from the power
supply before you insert or remove cards.
Otherwise, voltage peaks at the bus plug can
damage the card.
To Next Page
Loading...