Software Configuration
2-10
01/00 AWB27-1239-GB
The following entries are made in the fields:
Line: Number of the network line (0 = Basic unit;
1 to 9 = Expander rack)
Rack/Station: Number of the rack (0 = Basic unit;
1 bis 30 = Expander rack)
Slot/Module: Slot number in the rack. All digital
input and output cards are given the slot number
“0”.
Type: PS416-INP/OUT card
How to use the Topology Confiugrator is explained in
detail in the manual “Sucosoft S40 Programming
Software – User Interface” (AWB2700-1305GB).
Setting card
parameters
The card parameters are set in the “Parameters”
dialog box of the Device Configurator. Specify the
highest available input byte address of all inserted
digital input cards of a rack. The basis for this is the
address set on the card.
Several digital input and output cards can be
grouped together in one rack as the type
“PS416-INP/OUT” and can be defined just once
for each rack.
To Next Page
Loading...