Moeller PS416-INP-40 SERIES - PS416-OUT Addressing Example

Setting addresses
3-9
01/00 AWB27-1239-GB
PS416-OUT-400/-410
The positions of switches 7 and 8 do not matter.
Figure 3-3: Coding switch set for Address 4
Example
The following figure illustrates a sample assignment
of a rack with input and output cards. It shows how
the marked digital output cards are addressed.
Figure 3-4: Addressing of PS416-OUT-400 digital output
cards using an example configuration
PS416-OUT-410
A byte is reserved in the central unit for the eight
outputs of the PS416-OUT-410 card. The cards are
therefore addressed one after another. Both even-
numbered and odd-numbered addresses are
allowed.
Table 3-2 from page 3-10 illustrates how poles 1 to 7
of the coding switch must be set for each card. It also
shows the output bytes used by the software to
address the cards.
ON
2 34
5
6
7
8
1
POW
NET 400
0246 81012
INP 400 INP 400
AIN 400 AIN 400
OUT 410 OUT 400 OUT 400 OUT 400
INP 401 INP 401
OUT 400 OUT 400 OUT 400 OUT 410 OUT 410
INP 400 INP 400 INP 400
1415
3202
Slot
Adr.