if needed. Place the
handle (#1) on the
faucet. Version 2: The
handles must be
assembled in in the off
position. To accomplish
this, place the handle on
top of the cartridge stem
and rotate to the off
position. If the handle is
not facing the correct
direction, lift it off, turn it
to the correct direction
and place back on the
cartridge stem.
2. Tighten the set screw
(#2) with a 3/32" Hex
wrench.
For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing.
The guide will contain repair details, troubleshooting and specific information on assembling handles associated with
that style of product.
Still Not Finding What You're Looking For?
Contact Us or Call 1-800-BUY-MOEN
Non US? Moen Canada | Other International Sites
https://solutions.moen.com/Article_Library/Two_Handle_4%22_Centerset_Lever%3A_Hex_Screw
Updated: Tue, 09 Nov 2021 20:31:26 GMT
Powered by
2
To Previous Page
Loading...
