REMOTE CONTROL
FAULT DIAGNOSES SOLUTIONS
THE BLUE LIGHT OF WATER
TEMPERATURE IS FLICKERING.
LOW BATTERY. PLEASE REPLACE WITH NEW BATTERIES.
CHECK WHETHER OR NOT THERE IS WATER
ON THE REMOTE CONTROL.
WIPE OFF WATER WITH A DRY TOWEL.
ALLOW REMOTE TO DRY BEFORE USE.
QSG00036 - 11/02
THE PRODUCT DOES NOT FLUSH.
NO POWER SUPPLY.
ENSURE TOILET IS PLUGGED IN AND
OUTLET IS FUNCTIONING PROPERLY.
WATER BOWL IS EMPTY AND NO SOUND OF FLUSHING.
ENSURE WATER SUPPLY IS FULLY ON.
CONTACT MOEN FOR ASSISTANCE.
FLUSH VALVE IS HEARD, BUT WATER IS NOT FLOWING.
1. CHECK THE WATER SUPPLY LINES FOR A KINK.
2. ENSURE SUPPLY VALVE IS FULLY OPEN.
3. IF PROBLEM PERSISTS;
CONTACT MOEN FOR ASSISTANCE
CONTINUOUS FLOW OF WATER SUPPLY.
1. TRY FACTORY RESET OF TOILET BY UNPLUGGING
POWER CORD, WAITING 1 MINUTE AND PLUGGING
BACK IN. FOLLOW START UP PROCEDURE.
2. IF PROBLEM PERSISTS;
COTACT MOEN FOR ASSISTANCE.
REMOTE CONTROL IS NOT WORKING.
TOILET UNIT
FAULT DIAGNOSES SOLUTIONS
SOFT-CLOSING FEATURE
FOOT TOUCH SENSOR DOES NOT WORK.
FAULT DIAGNOSES SOLUTIONS
SOFT-CLOSED FEATURE DAMAGED.
1. TRY FACTORY RESET OF TOILET BY UNPLUGGING
POWER CORD, WAITING 1 MINUTE AND PLUGGING
BACK IN. FOLLOW START UP PROCEDURE.
2. IF PROBLEM PERSISTS;
COTACT MOEN FOR ASSISTANCE.
To Next Page
Loading...
