Moen KINGSLEY MOENTROL T3113 User Manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Rev. 3/07
ADA
KINGSLEY™ MOENTROL
®
Single-Handle Tub/Shower Trim Only
Models: T3113, T3113BN, T3113WR,
T3113AN, T3113ORB, T3113AZ
FINISHED
WALL LINE
C
5-1/2"
(140mm)
WALL OPENING
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-1/16" (52mm) MAX.
1-7/16" (37mm) MIN.
1-3/4" (44mm)
L
7" (178mm)
ESCUTCHEON
DIAMETER
FLOOR
TUB RIM
7" (178mm)
MIN.
FAUCET DESCRIPTION
• Metal construction with chrome plated, antique nickel, oil
rubbed bronze, wrought iron, LifeShine
®
brushed nickel
or antique bronze finishes
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1,
ICC A117.1 and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations

Moen KINGSLEY MOENTROL T3113 Specifications

General

Brand	Moen
Model	KINGSLEY MOENTROL T3113
Category	Plumbing Product
Language	English

Summary

Moen Faucet Description and Features

Faucet Construction and Finishes

Details metal construction with various finishes including chrome, nickel, bronze, and wrought iron.

Faucet Operation

Describes the lever handle operation, temperature control, and pressure balancing mechanism.

Flow Rate Specification

States the showerhead flow rate is limited to 2.5 gpm (9.5 L/min).

Cartridge Design

Mentions the 1225 cartridge design and its compatibility with back-to-back installations.

Standards Compliance

Notes third-party certification to ASME and CSA standards for safety and performance.

Product Warranty Information

Outlines lifetime limited warranty for residential use and 5-year warranty for commercial installations.

Moen Kingsley Product Details

Model Series

Identifies the product as KINGSLEY™ MOENTROL Single-Handle Tub/Shower Trim Only.

Available Model Numbers

Lists specific model numbers for the Kingsley trim, including T3113 variants.

Critical Dimensions Diagram

Escutcheon Diameter

Specifies the escutcheon diameter as 7" (178mm).

Wall Opening Size

Indicates the required wall opening is 5-1/2" (140mm).

Handle Operation Arc

Shows the 180° arc of handle travel for temperature adjustment.

Spout and Shower Height

Details height requirements for shower (45"/48") and tub spout (32").