Moes 002FB - Page 14

14
1. Touch to switch between manual mode and program mode. In manual
mode, will be displayed at the bottom of the screen. In program mode, touch
and hold the clock icon until the weekday schedule settings appear (numbers 1 to
6 will show along the left of the screen).
2. Use the left and right arrow icons to adjust the time.
3. Press the clock icon and use the up and down arrows to set the temperature for
the first period.
4. Press the clock icon again and use the up and down arrows to set the time for the
2nd period. Repeat this process for periods 3, 4, and 5,6.
5. Press the clock icon once more to enter the Saturday schedule settings (number
6 will show along the left of the screen).
6. Repeat the above process to set the period, temperature, and Sunday schedule.
Press the clock icon once more to confirm and exit.
Default Settings for Program Schedule
Time
Display
Weekday (Monday –
Friday) (1 2 3 4 5 shows
on screen)
Weekend (Saturday) (6
shows on screen)
Weekend (Sunday) (7
shows on screen)
Time
Temperature
Time
Temperature
Time
Temperature
Period 1
6:00
20 °C
6:00
20 °C
6:00
20 °C
Period 2
8:00
15 °C
8:00
20 °C
8:00
20 °C
Period 3
11:30
15 °C
11:30
20 °C
11:30
20 °C
Period 4
13:30
15 °C
13:30
20 °C
13:30
20 °C
Period 5
17:00
22 °C
17:00
20 °C
17:00
20 °C
Period 6
22:00
15 °C
22:00
15 °C
22:00
15 °C
Distinct schedules can be established for weekdays (Monday to Friday) and weekends
(Saturday or Sunday).
7. Monitoring Floor Sensor Temperature: Hold down the down arrow for 5 seconds
to view the temperature of the floor sensor.
8. Configuring Functions and Options: To access system functions, switch off the
thermostat. Simultaneously press and hold and the time icon for 5 seconds.
Then, use to navigate through available functions. Utilize the up and down arrow
icons to modify the options. All changes are automatically confirmed.