12
Note:
The maximum current output of the ChargeDock when used as a
power bank is 1.5A. Devices capable of accepting more than 1.5A
(input) may charge slower than usual. Devices that use less than
1.5A will safely charge as normal. Some device manufacturers may
use dierent configurations or have unique charging requirements.
You will need to have a USB cable compatible with your device.
Moki cannot guarantee this product will charge all devices
(maximum output 1.5A / capacity 2200mAH).
1) Using your devices USB charge cable, insert into the
USB port on the ChargeDock. Connect other end to
your phone.
2) Press the ON/OFF button on the ChargeDock.
3) When your device is fully charged or the power
bank is flat, disconnect the cable.
CHARGE A
USB DEVICE
To Next Page
Loading...
