Mold-Masters TempMaster MT Quick Guide

© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
Refer to the MT Controller User Manual for full instructions and safety information.
Set the Temperature Scale
1. Choose any zone to see the Initial menu.
2. Choose [ ] to see the Function menu.
3. Choose [Program] to see the Program menu.
4. Choose [] or [] to nd the page containing a C/F option.
5. Choose [C/F] to see the Temperature Scale option.
6. Choose [C] or [F] as required.
7. Choose [ ] twice to return to the Main display.
Choose J / K Type Thermocouples
1. Choose any zone to see the Initial menu.
2. Choose [ ] to see the Function menu.
3. Choose [Program] to see the Program menu.
4. Choose [] or [] to nd the page with the thermocouple
option.
5. Choose [T/C] to open the sensor type option.
6. Choose [J] or [K] to suit the tool in use.
7. Choose [ ] twice to return to the Main display.
Set the Boost / Standby Temperature
1. Choose any zone to see the Initial menu.
2. Choose [ ] to see the Function menu.
3. Choose [Program] to see the Program menu.
4. Choose [] or [] to nd the page containing the Boost or
Standby option.
5. Choose [Boost] or [Standby] to open the value setting op-
tion.
6. Use [] and [] to set the required Boost or Standby
temperature.
7. Choose [ ] twice to return to the Main display.
Congure the ControllerMain Screens and Menus
Main Screens and Menus
Congure the Controller
Set the Temperature Scale
Choose J / K Type Thermocouples
Set the Boost / Standby Temperature
Set Warning and Alarm Temperature Limits
Set a Response to a Thermocouple Fail
Change Screen Language
Set Zone Temperatures
Operate the Controller
Start and Stop the Controller
Change Temperature
Change to Manual Mode - Individual Zones
Return to Auto Mode
Change to Boost / Standby Mode - Individual Zones
For MT Controllers Only: Change to Standby or Boost Mode - All
Zones
Global Support
Main Display Functions:
• Displays Actual and Set
temperature for each of the
two zones
• Displays the applied power
and current
Initial Menu
Description:
Button Function

Raises temperature or
power

Lowers temperature or
power
Switches control form
Manual to Auto mode
Switches zone on or o󰀨
Displays setup options
Closes the menu
Function Menu Gives access to:
• Displays three run modes:
Manual, Standby and Boost
• [Program] button displays the
conguration options
• [ ] button moves user back
through the menu
Quick Guide for Tempmaster™ MT / MT2 Controller

Mold-Masters TempMaster MT Specifications

General

Brand	Mold-Masters
Model	TempMaster MT
Category	Temperature Controller
Language	English