Molecular Devices SpectraMax ABS Installation Guide

Chapter 3: Before You Move the Instrument
5065391 A 8
Chapter 3: Before You Move the Instrument
Before you move the instrument, make sure that the new location is a dry, flat work area
that has sufficient space for the instrument, host computer, and required cables.
CAUTION! When transporting the instrument, warranty claims are void if improper
packing results in damage to the instrument.
To minimize the possibility of damage during storage or shipment, you should pack the
instrument in the original packaging materials. Correctly repacking the instrument includes
following applicable decontamination procedures and packing instructions.
Note: If you must store the instrument, then store it in a dry, dust-free,
environmentally controlled area.
Packing the Instrument
The original packaging is designed to protect the instrument during shipment.
CAUTION! When transporting the instrument, warranty claims are void if damage
during transport is caused by improper packaging.
To pack the instrument:
1. Make sure the plate drawer and cuvette chamber are empty.
2. Place tape to hold the cuvette chamber door closed.
3. Place the instrument back in the plastic bag.
4. Place the packing material on both ends of the instrument.
5. Place the instrument and the accessories tool box into the original instrument shipping
box.
6. Seal the top of the box with packing tape.

Molecular Devices SpectraMax ABS Specifications

General

Brand	Molecular Devices
Model	SpectraMax ABS
Category	Measuring Instruments
Language	English