Do you have a question about the Molecular Devices SpectraMax ABS and is the answer not in the manual?
Brand | Molecular Devices |
---|---|
Model | SpectraMax ABS |
Category | Measuring Instruments |
Language | English |
Explains the meaning of warning, caution, note, and tip symbols used in the document.
Lists and explains safety symbols found on the instrument for potential hazards.
Covers electrical, chemical/biological, and moving parts safety for instrument operation.
Details the process of connecting the instrument to a computer for operation.
Explains how to use the plate drawer and its behavior during operation.
Describes the cuvette chamber and proper cuvette handling and placement.
Explains how the instrument regulates plate chamber temperature from ambient to 45°C.
Outlines the procedure for connecting power and USB cables to the instrument.
Explains Optical Density (OD) and % Transmittance (%T) in absorbance measurements.
Describes technology normalizing absorbance to a 1 cm path length using water absorbance.
Covers Endpoint, Kinetic, and Spectrum read types for data acquisition.
Provides instructions and safety precautions for cleaning the instrument.
Details the procedure for replacing the instrument's fuses.
Guidance on preparing, moving, and packing the instrument for transport or storage.
Categorizes error codes based on potential causes like commands or hardware.
Provides steps to manually open the plate drawer if it fails to operate.
Lists part numbers for validation packages used with the instrument.
Details photometric, analysis modes, timing, temp, shake, compatibility, general, environmental, and physical specs.
Details photometric, analysis modes, timing, temp, shake, compatibility, general, environmental, and physical specs.
Covers Canadian ICES-001 compliance and FCC part 15/18 notices for digital devices.
Lists available accessories such as validation plates, kits, and power cords.
Details cuvette specifications, including standard, semi-micro, and ultra-micro types.