Molecular Devices SpectraMax ABS User Manual

5065390 C 43
Appendix B: Accessories
Part Number Description
0200-6117 SpectraTest ABS1 Absorbance Validation Test Plate
9000-0161 Cuvette Absorbance Validation Kit
R8024 SpectraPlate-Quartz UV-transparent Microplate
4400-0002 Power Cord (US, Canada, Japan, Mexico, India)
4400-0036 Power Cord, EC1 (Germany, France, Scandinavia, Italy, Korea)
4400-0037 Power Cord, EC2 (UK, Indonesia, Singapore, Malaysia)
4400-0038 Power Cord, AP1 (Australia, Hong Kong, China)
2400-0116 Dust Cover
Available Accessories
Cuvettes
The following cuvettes have been tested with the instrument. All have an optical pathlength of
1 cm (10 mm) and standard external dimensions (12.5 cm x12.5 cm). Their fill volumes differ only
because of their different internal width and chamber height dimensions.
Standard and Semi-micro Cuvettes
Several brands available.
Internal Width Minimum Volume Maximum Volume
10 mm ~ 1.8 mL 4.0 mL
4 mm ~ 0.75 mL 1.4 mL
2 mm ~ 0.40 mL 0.7 mL
Ultra-micro Cuvettes (Hellma)
When ordering, specify the Z-dimension to be 15 mm.
Hellma Cat. No. Window Size Chamber Volume Fill Volume
105.201-QS 2.0 x 5.0 mm 100 µL 120 µL
105.202-QS
a
2.0 x 2.5 mm 50 µL 70 µL
105.210-QS
b
0.8 mm diameter 5 µL 10 µL
a. You must put a riser (0.8–1 mm) on cuvette bottom to match the
cuvette window to the beam. 2.0 x 2.5 mm 50 µL 70 µL 105.210-QSb
b. You must put a riser (0.8–1 mm) on cuvette bottom to match the
cuvette window to the beam. Gives good qualitative results (i.e.
spectral scans), but quantitative results are impractical because the
window is smaller than the beam.
B

Molecular Devices SpectraMax ABS Specifications

General

Brand	Molecular Devices
Model	SpectraMax ABS
Category	Measuring Instruments
Language	English