Do you have a question about the Monacor Carpower Power-2/250 and is the answer not in the manual?
Output power at 2Ω | 2 x 250 W |
---|---|
Output power bridged at 4Ω | 1 x 500 W |
Signal-to-noise ratio | > 90 dB |
THD | < 0.05% |
Channel separation | >60 dB |
Input impedance | 10 kΩ |
Impedance | 2 - 8 Ω |
Power Output (Max) | 2 x 250 W |