E39
PA-24FMU
PATEL-1
SLA-35
Base_DE_001-176.qxd 28.01.2014 14:45 Uhr Seite 39
AMPLIFIERS
PA Technology 2014
Emergency Sound System
•RJ45 jack for control output NO/NC
and mono audio outputfor the connec-
tion to the supplied screw terminal
adapter box
• Supplied withCat. cable and TAE cable
•Power supply via supplied plug-in PSU
Order No. 17.2570
PA emergency sound system, for integrating
into PA systems according to EN 60849.
• Hand-held microphone with monitored
functionality
• Alarm input for triggering alarm
• Integrated digital voice storage (60 sec-
onds max.) with microphone input or line
input for recording messages
• Recorded message is also kept without
operating voltage
• Siren emits an acoustic signal for 10 sec-
onds when alarm is triggered, volume
control
• Built-in signal light FIRE flashes when
alarm is triggered
• Balanced line outputvia
spring-loaded termi-
nal
• 24 V powersupply
via PSS-3000SV,
available at option
Model PA-24FMU
Output level 1.23V/600 Ω,bal.
Siren frequency 800 Hz
Max. recording time 60 seconds
Power supply 24 V‡/200 mA
Dimensions 482x88x200 mm, 2 RS
Weight 3kg
Order No. 17.4170
PA telephone announcement adapter, for
connecting to a telephone system as an
analogue AB extension line.
• Announcement facility for each telephone
connected to the telephone system
• Automatic call acceptance
• Automatic disconnection
• Chime can be switched on additionally
• Analogue telephone connection (RJ11)
Order No. 21.4010
Stereo level and impedance matching
amplifier
Volume distor tions or volume losses may
occur when connecting smartphones, mobile
phones, tablet PCs and MP3 players to an
amplifier or a mixer. Due to the correct
setting of impedance and gain, the SLA-35
is able to provide a better sound.
• Adjustable attenuation down to 1/10
(-20 dB) or gain up to 10-fold (+20 dB)
• Impedance switching Hi/Lo
• RCA and 3.5 mm stereo inputsand
outputs
• Metal housing
• Suppliedwith plug-in PSU
Model SLA-35
Frequency range 3-50,000 Hz, -1 dB
Input voltage 7 V max.
Output voltage 4.5 V max.
Input impedance 35 kΩ/8.1 kΩ (switch -5.6 dB)
Output impedance 1.6 kΩ
Amplification factor 0.1-10 (±20 dB)
continuously adjustable,
additionally -5.6 dB, switchable
THD <0.03 %
Crosstalk attenuation >68dB
S/N ratio >83dB
Power supply via suppl. PSU
Dimensions 88x37x103 mm
Weight 450 g
tools4music 04/2013
"Thisunit is an excellent addition to your
tool case. Withthe requiredconnec-
tions and a volume control with well-
dimensioned
amplification, the SLA-35
from MONACOR is an ideal aid for level
adjustments. It is of solid workmanship
and service-friendly. The SLA-35 was
intended as abasic level control and
impedance converter. However, due to its
excellentS/N ratio and the wide frequency
range, it is also suitable for traditional
high-end premium hi-fi applications."
tastenwelt 04/2013
"With the SLA-35, it is also possible to
usesmartphones as an audio source at
the mixer. The level/impedance converter
allows for perfect signals. This results in
absolutely clean signals which prevent
both clipping and noise. Top workman-
ship!"
GB_001-117.qxd 29.01.2014 12:59 Uhr Seite 39
To Next Page
Loading...
Need help?
General
