In the first label, the large "M" logo and thick black line exceed
the allowed black to white print ratio. In the second label, the
large "M" logo does not exceed the black to white print ratio.
Using the Hex Method
The following steps explain how to derive a hex character string
from a bitmapped graphic.
Each square on the grid represents a dot. A black square
indicates the dot is ON, and a white square indicates the dot is
OFF. A sequence of binary numbers, called a bit pattern or
bitmap, determines what dots are on and off. The numbers "0"
and "1" are used for this purpose. The number "1" turns a dot on
and "0" turns a dot off.
Exceeds
Limit
Exceeds
Limit
0.5"
2 inches
Does not
exceed
limit
0.5"
Does not
exceed
limit
2 inches
Creating Graphics
5-5
To Next Page
Loading...
