defining boxes 3-27
defining constant text fields 3-20
defining lines 3-25
defining non-printable fields 3-19
defining text fields 3-3
defining the header 3-2
designing 1-5 - 1-7
determining content 1-6
downloading sample 6-2
field types described briefly 1-9
filling in worksheets 1-10
font considerations 1-9
modifying partial parameters 6-10
referenced in batch packet 6-3
sample 1-2, A-2
sample of compliance A-12
using grids 1-8
formatting errors
list of 8-18
G
generating check digits with option 31
4-10
graphic
defining bitmap fields 5-15
defining duplicate fields 5-17
defining next-bitmap fields 5-16
defining the header 5-13
field, defining 5-22
hexadecimal chart C-17
hexadecimal method 5-3, 5-5
including in a format 5-22
overview of bitmap 5-3
run length chart C-21
run length method 5-3, 5-7
storing the image 5-9
graphic image
including 5-22
graphic packets
clearing from memory 2-30
grid
overview 1-8
H
help, getting 8-5
hex graphic packet
sample 5-19
human readable characters
placement considerations 9-6
selecting for a bar code 3-18
I
image buffer 2-24
imaging
repeating parameters 9-5
using zero batch headers 9-3
imaging time
when to use scalable fonts 9-5
IMD
printing existing config 8-2
immediate commands
enabling 2-28
sending 2-28
table 2-28
when to use 2-28
including
compliance label, in a format 5-22
graphic image 5-22
incrementing fields
fixing the first number 4-15
in batch data 6-7
restrictions 4-2
syntax 4-15
using option 60 4-15
inform ation
printing 6-7
inquiry request
explanation of 7-2
inquiry response
explanation of 7-2
International code pages 2-10
6
Index
To Next Page
Loading...
