used. "MADE IN USA" is printed in this field. The internal symbol
set is used.
Defining Line Fields
Use lines to form borders and mark out original prices. Define
each line separately. This field is not assigned a field number, but
is counted as a field (keep this in mind, as the printer allows a
maximum of
1000
fields or
100
for 9403 printer per format). You
can define any line length and a thickness up to 99 dots, as long
as the solid black print does not exceed 30 percent of any given
square inch of the label.
Line Types
You can create horizontal and vertical lines. Define lines as
Segments
Choose starting point and ending point.
Vectors
Choose starting point, angle, and length of
line.
Syntax
L,type,row,column,angle/end row,length/
end col,thickness,"pattern" p
L1. L Line Field.
L2. type Type of line. Only vertical and horizontal lines are
supported. Options:
S
Segment. Choose starting
point and ending point.
V
Vector. Choose starting
point, angle, and length.
L3. row Distance from bottom of print area to
the starting point.
Defining Fields
3-25
To Next Page
Loading...
