Potensi Elevator
13
/
13
Step 5: Press the PRG key to return to the main menu
Error help
Error Help provides the cause and solution of the error in the all-in-one controller for debuggers
to see.
Step 1: Move the cursor to the position below screenshot shown on the main interface
Step 2: Press the knob to determine the key or function key 2 to enter the secondary menu, as
shown in the figure:
Step 3: Press the function key 2 or the knob OK key to enter the main interface as follows
Operator settings
Operator settings are provided to the debugger to set the operator itself, such as password, time,
date, language, etc. The operator setting is relatively simple, and the operation steps are basically
the same as the above icons, which will not be repeated here.
To Previous Page
Loading...
