Need help?Do you have a question about the Mondolfo Ferro TBE 156 PRO N and is the answer not in the manual?
Defines hazard levels (DANGER, WARNING, CAUTION) and associated risks for safe operation.
Details essential safety devices like emergency stop and dead-man principle.
Strictly prohibits modification or removal of safety devices.
Guidelines for safe handling, lifting, and storage of the machine.
Instructions for unpacking, inspecting for damage, and handling accessories.
Covers site requirements, screw anchor installation, and environmental conditions.
Outlines component assembly, required tools, and electrical connection guidelines.
Procedures for long-term storage and environmentally compliant disposal of the machine.
Warnings and guidelines for handling, disposing, and preventing leaks of hydraulic fluid.
Information from the nameplate and instructions for routine cleaning and upkeep.
Critical notes on relief valve, pressure limiter, and safety during maintenance.
Explains the functions of the emergency switch and control levers on the arm.
Describes the functions of the mobile control column levers and pedals.
Key safety warnings for clamping wheels, including heavy loads and proper securing.
Instructions on lubricating tyre beads to prevent damage during fitting/removal.
Procedure for switching between the tool and the bead breaker disk.
Step-by-step guide for removing and fitting tubeless tyres onto the rim.
Detailed steps for removing tyres from wheels with split rings.
Instructions for fitting tyres onto wheels with split rings.
Critical safety warnings and procedures for inflating tyres, including dangers of bursting.
Guidance on selecting appropriate fire extinguishers for different fire types.
Information on proper disposal, hazardous substances, and environmental protection measures.
Provides a table of specific torque values for screws and nuts with metric threads.
General| Manufacturer | Mondolfo Ferro |
|---|---|
| Model | TBE 156 PRO N |
| Category | Tyre Changers |
| Maximum Rim Diameter | 26" |
| Minimum Rim Diameter | 10" |
| Air Pressure | 8 bar |
To Next Page