4 Silver Series 7G
Atmos
In-Ceiling
When arranging the overhead channels in an Atmos system we would recommend using our three-way
in-ceiling speakers. These employ a unique pivoting midrange/ tweeter module which offers a wider
dispersion characteristic, and are ideal for Atmos duties. More information can be found on our website:
monitoraudio.com
Please see below for ideal positioning of 2 or 4 Atmos speaker setups. Typically these would be in line with
the front left and right speakers.
65°
100°
Ear Level
80°
30°
125°
150°
45°
55°
Ear Level
135°
Silver AMS Dolby Atmos
®
Enabled Speakers
Our new Silver AMS speakers offer a dedicated solution and alternative to in-ceiling Atmos installations.
They can be positioned directly on top of the front and/or rear speakers in a 2 or 4 Atmos speaker setup.
Additionally and alternatively, the Silver AMS can also be wall mounted for use as surround or height
speakers.
Fixing Silver FX & Silver AMS to a Wall
CAUTION: Always determine where the Silver FX or Silver AMS will be xed and the structure of the wall.
For safety reasons, if unsure of your ability to provide a secure and safe xing, do not attempt to x
these speakers to a wall. Instead, please obtain the services of a competent and qualied trades
person.
CAUTION: Ensure that water pipes or electricity cables do not run behind where the speakers are going
to be secured. Work from secure steps and avoid trailing wires.
NOTE: We do not supply wall xing screws and plugs with the Silver FX or Silver AMS. Please only use
suitable xings for the type of wall construction the speakers will be xed to.
The Silver FX and Silver AMS comes with keyhole inserts. To x the speakers to the wall, we would
recommend using the wall xing template enclosed within the packaging carton.
To Next Page
Loading...
Need help?
General
