Spiked
Foot
Assembly
For
Carpeted
Floors
The
Silver
spiked foot
assembly
incorporates a spike for use on carpeted
floors
and also,
a soft
polymer
pad (for use on wooden or
tiled floors).
~
Please
ensure there are no hidden wires under the carpet that
could
be damaged
ill
by the spikes.
Locking
Nut
__
......,...,
Main Threaded _
__....,
Assembly
Spike
______
....,.
The foot comes fully assembled
for use
on carpeted
floors.
All
that
is
required
is
fixing into the bottom of the cabinet. This
is
achieved by
simply screwing the feet fully
into the 4-threaded insert
in
the underside of
the cabinet.
If
your carpet has a very thick
pile,
remove the soft polymer pad from the
foot
to
ensure the spike goes right through
the carpet into the
floor.
With great care turn
your cabinet the right way up. Place the
cabinet
in
your desired
location,
and check
that it
is
level
on
all
sides.
If
it
is
slightly
uneven, unscrew the spike at the lowest
point and check again.
Continue this process
until
the cabinet
is
fully
level.
Use the
locking
nut on the foot to fix
the foot
in
place
and to stop any unwanted
vibrations.
Spiked
Foot
Fixing
For
Wooden/Hard
Floors
For use on
solid floors
or where spikes are inappropriate, it
is
possible
to use the foot without the spike.
To
use the foot
in
this
manner carefully grip the
knurled portion of the spike and rotate anti
clockwise
to unscrew the spike
fully.
You
may find it easier
to
first remove the polymer
pad so
as
to
gain
more purchase on the spike.
The pad should be
replaced
before carrying out the levelling
operation
previously described.
2
To Next Page
Loading...
Need help?
General
