Need help?Do you have a question about the Monitor Audio FB210 and is the answer not in the manual?
General| Driver Size | 10 inches |
|---|---|
| Dimensions (H x W x D) | 320 x 320 x 340 mm |
| Weight | 14.7 kg |
| Inputs | LFE RCA, Stereo RCA |
| Finish | Black or White |
| Driver | 10-inch long-throw driver |
Procedure for returning equipment for repair or replacement under warranty terms.
Critical information regarding voltage settings and connection order to prevent damage.
Recommendations for optimal placement to ensure ventilation and avoid interference.
Description of the power switch function, including automatic standby mode.
Setting for audio or video modes to optimize subwoofer output for different content.
Adjustment for subwoofer loudness to achieve balanced sound with main speakers.
Feature controlling the frequency at which the subwoofer rolls off.
Synchronizes subwoofer phase with main/satellite speakers for optimal bass integration.
Output for connecting to an additional power amplifier or daisy-chaining units.
Line-level input for connecting from pre-amplifiers or AV receivers.
Input for connecting directly from amplifier output terminals using speaker cables.
Output for connecting main speakers when using high-level input.
Location and replacement information for the mains fuse.
Description of the 3-pin IEC socket for mains power connection.
Selector for adjusting the unit to the correct country's mains voltage specification.
Guidance on adjusting controls like phase, gain, and frequency for optimal sound.
Checks for common issues causing a lack of sound output from the unit.
Troubleshooting steps for overly pronounced bass frequencies.
Steps to resolve issues with insufficient bass response.
Guidance on identifying and resolving unwanted vibrations or rattles.
To Next Page