Monitor Audio STUDIO User Manual

HiVe II (High Velocity, Low Noise Reflex Port)
Monitor Audio’s port technology uses a straight rifled design to accelerate air flow and reduce turbulence.
HiVe II technology has the ability to move air in and out much quicker than a conventional port, the result is
fast powerful bass coupled with superior transient response.
The super slim Studio cabinet is tuned using two rear mounted HiVe II ports mounted at the top and
bottom of the cabinet, this is to ensure the pressure inside the cabinet is balanced symmetrically. The large
port surface area also ensures there is no turbulence and resulting air noise, which can be a problem in
small cabinets.
Single Bolt Though Driver
Studio features our unique single bolt-through driver system, coupled from the rear of the cabinet.
Tightened to a specific torque setting, it serves to provide the driver with an equal clamping force around
the periphery, whilst ensuring the motor system is braced. Since this is effectively an additional form of
bracing, the cabinet system with drivers installed becomes even more rigid.
monitoraudio.com 3
ENGLISH

Monitor Audio STUDIO Specifications

General

Bass reflex	Yes
Product color	Gray
RMS rated power	120 W
Recommended usage	-
Audio output channels	- channels
Speaker placement	Tabletop/bookshelf
Satellite speaker type	2-way
Satellite speaker weight	7580 g
Number of satellite speakers	2
Satellite speakers RMS power	- W
Satellite speaker sensitivity	86 dB
Satellite speaker frequency range	48 - 60000 Hz
Satellite speaker tweeters quantity	1
Satellite speaker dimensions (WxDxH)	156.2 x 360.9 x 340 mm
Satellite speaker crossover frequency	2700 Hz
Satellite speaker mid-range driver diameter	4 \
Connectivity technology	Wired
Finish type	Gloss