EasyManua.ls Logo

monolith OL 141 - Page 25

monolith OL 141
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Avoid the build-up of heat by not placing the laminator
directly up against a wall or under cupboards or similar.
Protect the laminator from direct sunlight.
Never place the laminator on or near hot surfaces (e.g. stove-
tops, heaters etc.).
Ensure that the mains cord does not come into contact with
hot parts.
Never expose the laminator to high temperatures (heaters
etc.) or to the eects of the weather (rain etc.).
Never laminate damp documents or organic objects (e.g.
owers, leaves etc.).
Do not cut the laminating pouches into pieces before
laminating and do not in any case cut o the sealed edges
from the laminating sheets.
Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
Only laminate at room temperature (approx. 10–25 °C).
Never insert metallic objects (e. g. paper clips, staples etc.) or
objects other than laminating pouches which are intended
for this laminator into the laminating pouch infeed slot.
The laminator has vents. Never cover them with other objects
such as magazines, blankets or similar.
Never ll the laminator with liquid.
Never attempt to clean the laminator by immersing it in water
and do not use a steam cleaner to clean it. Otherwise, you
could damage the laminator.
Safety

Related product manuals