30
Storage
Cleaning the heating rollers
1. Switch the laminator on by moving the ON / OFF switch
3
to ON.
2. Once the ready indicator
1
turns red, fold a sheet of paper and insert it, folded
edge rst, into the laminating pouch infeed slot
2
.
3. Keep repeating this process until no more glue deposits cling to the paper.
4. Switch the laminator o by moving the ON / OFF switch to OFF.
Storage
NOTICE!
Risk of damage!
Improper storage of the laminator may result in damage to the
laminator.
− Never store the laminator next to a heat source.
− Do not fold or kink the mains cord.
− Only stow the laminator if it is dry.
− Always store the laminator in a clean, dry area that it is protected from direct
sunlight and is not accessible for children.
− Use the original packaging for storage.
Technical data
Model: OL 141
Mains voltage: AC 220–240 V / 50 Hz
Power consumption: 145 W; 0.63 A
Protection class: II
Weight: approx. 0.7 kg
Dimensions (W × D × H): approx. 338 x 100 x 58 mm
Preheating time: 3-4 min.
Pouch thickness: up to 100 mic
Operating speed: 300 mm/min.
Laminating temperature: approx. 125 °C
Maximum lm width: up to A4
To Next Page
Loading...
