29
Cleaning
Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation. You may burn
yourself.
− Always let the laminator cool o completely before you clean it.
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Never submerge the laminator in water or other liquids.
−
Make sure that no water or other liquids penetrate the housing.
NOTICE!
Risk of damage!
Improper handling of the laminator may result in damage to the
laminator.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, metal sponges and the like. They could damage the
surfaces.
− Do not in any case place the laminator in the dishwasher.
It would be destroyed as a result.
1. Disconnect the mains plug before cleaning.
2. Let the laminator cool o completely.
3. Use a damp cloth to wipe o the laminator. Let all parts dry completely
afterwards.
To Next Page
