Monroe Ultimate - Getting Started; Initial Setup Procedures; WARNING

8
Getting
Started
REMOVE THE RIBBON CUSHION!
To protect the print mechanism and secure the
ribbon spools in position during shipment a
foam pad lies between the ribbon spools and
the printer door.
REMOVE THIS FOAM PAD
BEFORE OPERATING!
Failuretoremovethispadwillresultin
misoperation and possible damage to the
calculator.
WARNING
/(A(9+6-,3,*;90*(3:/6*2
NO USER SERVICEABLE PARTS ARE
*65;(05,+05:0+,(33:,9=0*05.
MUST BE DONE BY A QUALIFIED
:,9=0*, 7,9:65
The socket-outlet shall be installed near the
equipment and easily accessible.
To protect the print mechanism and secure the
ribbon cartridge in position during shipment a
foam pad lies between the ribbon cartridge and
the printer door.
REMOVE THE RIBBON CUSHION!
REMOVE THIS FOAM PAD
BEFORE OPERATING!
WARNING
HAZARD OF ELECTRICAL SHOCK.
NO USER SERVICEABLE PARTS ARE
CONTAINED INSIDE. ALL SERVICING
MUST BE DONE BY A QUALIFIED
SERVICE PERSON.
Monro-Manual-1-50 1/26/10 6:07 PM Page 8