What to do if my Monster Power Home Theater System is overloaded?
If your Monster Power Home Theater System's PowerBar is overloaded and the thermal circuit breaker trips, press the RESET button located below the power cord. Wait 10 minutes before resetting to avoid premature overload sensing.
How to troubleshoot a Monster Power Home Theater System PowerBar that is not receiving power?
If your Monster Power Home Theater System's PowerBar isn't receiving power, check the following: * Ensure the PowerBar switch is turned on. * Verify the AC power plug is correctly plugged into a grounded 120V wall outlet. * Try the light switches near the wall unit powering the PowerBar. * If plugged into a component, ensure that component is turned on; for optimal performance, plug directly into a wall outlet. * If the component is plugged into a switched outlet, turn the PowerBar on or plug the component directly in. * If the PowerBar is plugged into a switched outlet on a component, turn on the component.
Why do my Monster Power Home Theater System speakers emit a humming noise?
If your Monster Power Home Theater System speakers are humming or buzzing, it might be due to the PowerBar sharing AC power with improperly grounded equipment. Connect your PowerBar to a dedicated outlet to resolve this.
General| Brand | Monster Power |
|---|---|
| Model | Powerbar 1100 |
| Category | AC Power Distribution |
| Language | English |
To Next Page
