To Next Page
R
rgouldJul 29, 2025
What to do if my Monster Power HTS 2600 AC Power Distribution is not receiving power?
- JJoanna CaldwellJul 29, 2025
If your Monster Power AC Power Distribution unit is not receiving power, first, ensure that the PowerCenter switch is turned on. Also, verify that the AC power plug is securely plugged into a grounded 120V wall outlet. In some cases, a wall switch near the unit may need to be activated to supply power to the outlet. If too many devices are connected, causing an overload, tripping the Thermal Circuit Breaker, press the PowerCenter Thermal Circuit Breaker button in to reset. Allow 10 minutes before attempting to reset. If the Circuit Breaker continues to trip, try moving one or more components to another PowerCenter, as you may be drawing too much current.
General
