Monster ROVE - Getting Started - Charging The Speaker

GETTING STARTED - CHARGING THE SPEAKER
1. Connect the power cable to the
Rove speaker.
2. Plug the power cable into a wall outlet.
3. Press and hold the Power button
4. Rove will enter Bluetooth Pairing mode
automatically. Pair with your Bluetooth device.
When
unplugged,
the speaker
will enter
standby
mode after
15 minutes
of inactivity.
BEFORE FIRST USE:
Charge the unit for 6 hours.
Connect the speaker to a
power outlet to start charging.
When fully charged
WHITE LEDS
WIll remain solid
When low on battery
WHITE LED will flash rapidly.
To indicate battery level
Press the Power button
(Not To Scale)
7