Monster Speaker - Connecting Devices using 3.5 mm (1;8-inch) mini jack input

Connecting Devices using 3.5 mm
(1/8-inch) mini jack input
You can connect and listen to any music player that has
a standard 3.5 mm headphone port using a mini to
mini stereo cable (not included).
To connect, plug one end of the cable into the 3.5 mm headphone
output of your player and the other end into the 3.5 mm input on the
back of Beatbox.
™
IMPORTANT: The iPod
®
/iPhone
®
dock will override and disable
the 3.5 mm mini jack input when an iPod or iPhone is docked.
Be sure to remove your iPod/iPhone from the dock before
using the 3.5 mm input.
Listen
Be sure a music player is securely connected, as described
in the previous sections.
Turn on Beatbox by pushing the power button on the left side
of top surface of Beatbox or with the remote control.
Start your player.
Volume
Volume can be controlled with the volume control on the right
side of the top surface of Beatbox or with the remote control.
Using Remote Control to Control Beatbox
™
Make sure the CR2025 battery used by the remote is installed
correctly. If it is old, replace it.
Power on and off: Push
and release.
Volume: Push
and hold to increase volume. Release when
desired volume is reached. Push and hold to decrease volume.
Release when desired volume is reached.
Mute: Push
and release.
To resume sound, push again.
11
12