Montarbo MX20 - Technical Specifications

SPECIFICATIONS
MX20: 12 / MX28: 20 (standard versions)
- 60dB / 2,2 kOhms
- 30dB / 33 kOhms
0dB / 33 kOhms
48 V
30dB
H.F ±15dB @ 15kHz
M.F (freq) 0,18 ÷ 3kHz
M.F (level) ± 15dB
L.F ±15dB @ 50Hz
4 (standard versions)
- 40dB / 10kOhms
34dB
- 128dB
H.F ±15dB @ 15kHz
M.F ±15dB @ 600Hz
L.F ±15dB @ 50Hz
-127dB
> 70 dB / 1kHz
+ 16dB, 6dB before clipping
100 mm / > 80dB
2 x 205 stereo effects
24 bit
56 bit
40Hz ÷ 15kHz
< 0,1%
> 104dB
2
- 10dB
100Ohms
+ 22dB
2
- 10dB
10kOhms
+ 22dB
6
0dB
+ 22dB
600Ohms
0dB
H.F ±15dB @ 15kHz
M.F (freq) 0,18 ÷ 3kHz
M.F (level) ± 15dB
L.F ±15dB @ 50Hz
0dB
100Ohms
+ 22dB
0dB
600Ohms
20Hz ÷ 30kHz ±2dB
< 0,03%
>80dB (nom. levels, EQ Flat)
31-63-125-250-500 Hz, 1-2-4-8-16 kHz/±12dB
- 20dB
- 10dB
200 ÷ 600Ohms
MX20: 81,5 x 10,5 x 69 cm - 21 kg
MX28: 104,6 x 10,5 x 69 cm - 29 kg
44
Mono Input channels:
micro (sensitivity / impedance)
line (sensitivity / impedance)
insert-in (sensitivity / impedance)
phantom power supply
channel gain control range
equalization
Stereo Input channels:
line L/R (sensitivity / impedance)
channel gain control range
equivalent input noise
equalization
All channels
equivalent input noise
crosstalk (between channels)
peak LED indicator
fader (throw / attenuation)
Dual multieffect DSP
A/D, D/A Delta Sigma conversion
DSP
bandwith
THD
SNR ('A weighted')
External effect send:
nominal level
output impedance
max output level
External effect return (stereo):
nominal level
input impedance
max input level
Monitor outputs
nominal level
max level
min. load impedance
insert-in/out: nominal level
equalization
L/R Master, Mono outputs
nominal level
output impedance
max output level
insert-in/out: nominal level
min load impedance
frequency response
THD
S.N.R
Stereo graphic equalizer
Tape in: nominal level
Tape out: nominal level
Headphones: load impedance
Dimensions and Weights:
APPENDIX