Need help?Do you have a question about the Mooer Radar and is the answer not in the manual?
Connect the designated AC adapter to an AC outlet of the correct voltage.
Avoid environmental hazards, handle with care, and clean with a soft cloth.
Steps to select, enter, and navigate preset editing screens.
Details parameters like Tube, Input, Presence, and Output for power amp simulation.
Explains controls for Cab Model, Mic type, Mic Vol, C-Edge, and Distance.
Introduces the three post EQ sections: Graphic G, Graphic B, and Parametric.
Lists benefits of connecting to PC: preset management, editing, IR loading.
Instructions to download PC software from the MOOER website.
General| Power Supply | 9V DC (center negative) |
|---|---|
| Input Impedance | 1MΩ |
| Frequency Response | 20 Hz - 20 KHz |
| Sampling Accuracy | 24bit |
| Impulse Response Format | WAV |
| Display | OLED |
| Type | Cabinet Simulator |
| Signal to Noise Ratio | 100dB |
To Next Page