Moog Matriarch - Oscillator Patch Points

V1.2.0 RELEASE NOTES
Parameter ID Parameter Name Values
38
Keyboard Octave Transpose 0-4 = -2 to +2 (Default: 2 / no transpose)
39
Delayed KB Octave
Transpose
0 = Off, 1 = On (Default: 1 / On)
40
Glide Type
0 = Linear Constant Rate, 1 = Linear Constant Time, 2 = Exponential
(Default: 0 / LCR)
41
Gated Glide 0 = Off, 1 = On (Default: 1 / On)
42
Legato Glide 0 = Off, 1 = On (Default: 1 / On)
43
Osc 2 Freq Knob Range 0-24 Semitones (Default: 7)
44
Osc 3 Freq Knob Range 0-24 Semitones (Default: 7)
45
Osc 4 Freq Knob Range 0-24 Semitones (Default: 7)
46
Hard Sync Enable 0 = Off, 1 = On (Default: 0 / Off)
47
Osc 2 Hard Sync 0 = Off, 1 = On (Default: 0 / Off)
48
Osc 3 Hard Sync 0 = Off, 1 = On (Default: 0 / Off)
49
Osc 4 Hard Sync 0 = Off, 1 = On (Default: 0 / Off)
50
Delay Ping Pong 0 = Off, 1 = On (Default: 0 / Off)
51
Delay Sync 0 = Off, 1 = On (Default: 0 / Off)
52
Delay Filter Brightness 0 = Dark, 1 = Bright (Default: 1 / Bright)
53
Delay CV Sync-Bend 0 = Off, 1 = On (Default: 0 / Off)
54
Tap-Tempo Clock Division
Persistence
0 = Off, 1 = On (Default: 0 / Off)
55
Paraphony Mode 0 = Mono, 1 = Duo, 2 = Quad (Default: 0 / Mono)
56
Paraphonic Unison 0 = Off, 1 = On (Default: 0 / Off)
57
Multi Trig 0 = Off, 1 = On (Default: 0 / Off)
58
Pitch Variance 0-400 = Off to +/- 40 cents in 0.1-cent increments. (Default: 0 / Off)
59
KB CV OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
60
Arp/Seq CV OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
61
KB VEL OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
62
Arp/Seq VEL OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
63
KB AT OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
64
MOD WHL OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
65
KB GATE OUT Range 0 = -5V to +5V, 1 = 0V to 10V (Default: 0 / -5 to +5)
Global parameters for sysex editing (cont’d):