GENERAL CONTROL
- When connecting the appliance to power, you will hear a “beep” sound and all the
indicators on the control panel will light up for 3 seconds and the appliance will go
into standby mode. Use the ON/OFF button on the control panel or the remote
control to turn on the appliance.
- After turning on the appliance, the ionizer will start to work, and the appliance will
operate in “Auto Mode”.
- In “Auto Mode”, all four quadrants of fan speed indicator will light up, and the
appliance will measure air quality and display 1 of 3 colors: blue (good air quality);
green (moderate air quality); red (poor air quality). The appliance will automatically
adjust the fan speed according to the air quality. When in “Manual Mode”, the LED will
also change color according to the air quality, but the fan speed will remain what you
set it at.
- Use the “Timer” button on the control panel or remote control to choose the timer
program -Off/1/2/4/8 hours - (repeat).
- The ionizer can be turned on/off via the “Ionizer” button on the control panel or
remote control. When the negative ion function is working, the ion symbol on the
control panel will light up.
- The UV light will start to work after the appliance is turned on. After every 4 hours, the
UV light will turn itself off. The UV function can only be turned on/off via the remote
control.
support@mooka.co
- 05 -
To Next Page
Loading...
