5
User Manual
Moonboon Motor
Assembly
Your carabiners already comes with plastic parts mounted on them. The
plastic parts prevents metal against metal in your set-up. Before hanging
the motor, you need to attach the carabiners to the Moonboon Motor.
The carabiners must be put on from the side, laying flat against the Motor
- otherwise, they can not be rotated properly into place.
The narrow end of the carabiners should point towards the Motor, see
picture 4.
It is important that you lock your carabiners once they are fitted correctly.
This is done by gently securing the safety lock.
2
3
1
4
To Next Page
Loading...