moonboon Motor - Height Requirements; Ensuring Floor Clearance and Testing

7
User Manual
Moonboon Motor
Use of a Moonboon Motor and
Baby Hammock mounted in a Door
Frame Clamp requires a minimum of
86 inches / 220 cm between the
door frame and the floor.
Please note
Height
It is essential that Baby Hammock, Twin Baby Hammock or Cradle does
not touch the floor during operation. Before using your product, perform
two tests to ensure that it does not touch the floor.
First test: Without child
Mount the Baby Hammock, Twin Baby Hammock or Cradle as instructed
and manually stretch the spring as much as you can. Pull on the spring
until you feel the safety strap (the nylon strap inside the spring) preventing
any further expansion. When the spring is fully extended, space must
remain between the bottom of Baby Hammock, Twin Baby Hammock or
Cradle and the floor.
Second test: With child
Now place the child in the Baby Hammock, Twin Baby Hammock or
Cradle and repeat the test described above: Stretch out the spring until
you feel the safety strap keeping it from stretching further.
Here, too, space must remain between the bottom of the Baby Ham-
mock, Twin Baby Hammock or Cradle and the floor.
Follow these instructions and
perform the tests regularly as your
child grows and becomes heavier.
That is how you ensure that the Baby
Hammock, Twin Baby Hammock or
Cradle never touches the floor.
Please note