Moons' SSDC-ECX-J User Manual

Rev. 1.2
20/03/2020
SSDC-ECX-H/J
Step-Servo System
Hardware Manual
SSDC06-ECX-H/J SSDC10-ECX-H/J
SHANGHAI AMP&MOONS’ AUTOMATION CO.,LTD.

Moons' SSDC-ECX-J Specifications

General

Brand	Moons'
Model	SSDC-ECX-J
Category	Servo Drives
Language	English

Summary

1 Introduction

1.1 Features

Lists key features of the SSDC-ECX-H/J step-servo drive.

1.2 Block Diagram

1.3 Safety Instructions

2 Getting Started

2.1 Installing Software

2.2 Connecting to the PC using USB

2.3 Connecting the Power Supply

2.4 Choosing a Power Supply

2.4.1 Voltage

Explains voltage requirements and their impact on drive performance and temperature.

2.4.2 Current

Details current draw requirements and provides graphs of motor performance.

2.5 Connecting the Motor

2.6 Connecting the EtherCAT

2.6.1 EtherCAT Status Indicator LEDs

2.7 Setting the EtherCAT Node ID

3 Inputs and Outputs

3.1 Digital Inputs

3.2 Digital Outputs

3.3 Analog Inputs

4 Mounting the Drive

5 Warning and Fault Display

Alarm Codes

Enabled Status and Execution Q Program Status

6.2 Technical Specifications

6.3 Recommended Motors

6.5 Torque Curves