Need help?Do you have a question about the Moons' SSDC06-EC and is the answer not in the manual?
General| Continuous Output Current | 6 A |
|---|---|
| Supply Voltage | 24-48VDC |
| Control Mode | Position, Speed, Torque |
| Storage Temperature | -20°C to 85°C |
| Communication Interface | RS-485 |
| Protection Features | Overcurrent, Overvoltage |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5 to 95% RH, non-condensing |
Key capabilities and characteristics of the SSDC-EC stepper drive.
Essential safety guidelines for handling, installation, and operation of the equipment.
Steps for downloading and installing the Step-Servo Quick Tuner software.
Procedure for establishing communication between the drive and a PC using the RS-232 port.
Instructions for connecting the drive to a DC power supply, including polarity notes.
Considerations for selecting the appropriate voltage and current for the power supply.
Steps for connecting the motor power and encoder feedback cables to the drive.
Details on connecting the drive to an EtherCAT network using RJ-45 connectors.
Comprehensive technical data and specifications for the SSDC-EC drive.
To Next Page
