Moons' SSDC06-ECX-H User Manual

Rev. 1.2
20/03/2020
SSDC-ECX-H/J
Step-Servo System
Hardware Manual
SSDC06-ECX-H/J SSDC10-ECX-H/J
SHANGHAI AMP&MOONS’ AUTOMATION CO.,LTD.

Moons' SSDC06-ECX-H Specifications

General

Brand	Moons'
Model	SSDC06-ECX-H
Category	Servo Drives
Language	English

Summary

Introduction to SSDC-ECX-H/J Step-Servo System

Features of SSDC-ECX-H/J Drive

Highlights the programmable, digital step-servo drive and motor capabilities.

Safety Instructions for SSDC-ECX-H/J

Crucial safety guidelines for handling, installation, operation, and maintenance.

Getting Started with SSDC-ECX-H/J

Installing Stepper Suite Software

Steps to download, install, and launch the Stepper Suite software.

Connecting SSDC Drive to PC via USB

Instructions for connecting the drive to a PC via USB for configuration.

Connecting the Power Supply

Details on how to connect the drive to a DC power supply and grounding.

Choosing the Right Power Supply

Considerations for selecting the appropriate voltage and current for the power supply.

Connecting the Motor

Connecting the EtherCAT

Setting the EtherCAT Node ID

Inputs and Outputs Overview

Digital Inputs for SSDC-ECX-H/J

Details on the digital input signals and their pin assignments for different models.

Digital Outputs for SSDC-ECX-H/J

Mounting the Drive

Warning and Fault Display

Reference Materials

Technical Specifications

Detailed technical specifications for the amplifier, controller, communication, and physical aspects.

Recommended Motors

Accessories