To Next Page
E
edwardsdavidSep 8, 2025
What happens if current limit is reached on Moons' M2 Servo Drives?
- CCory RamirezSep 8, 2025
If the current limit is reached on your Moons' Servo Drives, there will be no change to the drive’s status.
What happens if current limit is reached on Moons' M2 Servo Drives?
If the current limit is reached on your Moons' Servo Drives, there will be no change to the drive’s status.
What to do if Moons' M2 Servo Drives show over current?
If you are experiencing an over current issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
What to do if Moons' M2 have a position error?
If you are experiencing a position error issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
What to do if Moons' Servo Drives are over temperature?
If your Moons' Servo Drives are overheating, the suggested solution is to turn the servo off.
What to do if Moons' Servo Drives show encoder error?
If you encounter an encoder error with your Moons' Servo Drives, the suggested solution is to turn the servo off.
What happens if STO is activated on Moons' M2?
If the STO (Safe Torque Off) is activated on the Moons' Servo Drives, the servo will turn off.
What happens if the Q program is empty in Moons' Servo Drives?
If the Q program is empty in your Moons' Servo Drives, there will be no change to the drive’s status.
What happens if there is movement when the drive is disabled in Moons' M2 Servo Drives?
If there is movement when the drive is disabled in your Moons' Servo Drives, there will be no change to the drive’s status.
What happens if CCW limit is activated on Moons' M2?
If the CCW limit is activated on your Moons' Servo Drives, there will be no change to the drive’s status.
What happens if CW limit or CCW limit is activated on Moons' M2 Servo Drives?
If the CW or CCW limit is activated on your Moons' Servo Drives, there will be no change to the drive’s status.
General| Type | Servo Drives |
|---|---|
| Series | M2 Series |
| Control Mode | Torque, Speed, Position |
| Communication | CANopen |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
