Moons' M2 Series - Software Configuration for Analog Torque Mode

M Series AC Servo
User Manual
109
Rev. 1.0
7/31/2019
400-820-9661
7.4.4 Software Configuration For Analog Torque Mode
The M servo suite can help you easily configured the drive and motor, as well as tuning parameters.
Step Operation
Description
1st Configure motor
Choose your motor number. Please refer to 2.3 Motor number for details.
2nd Choose control mode
In control mode, choose “torque” for torque mode.
3rd Control mode configuration
Choose specied torque analog type, please refer to 7.4 Analog torque
mode.
4th
Set analog signal function, or
digital input/output functions
In Input/Output functions to setup. Please refer to 4.8.3 CN2 connections,
and 7.4 torque mode and 7.1 general function settings.