Moons' M2 Series User Manual

M Series AC Servo
User Manual
23
Rev. 1.0
7/31/2019
400-820-9661
3. Installation
3.1 Storage Conditions
Some Storage suggestions are followed:
• Correctly packaged and store in a clean and dry ,avoid direct sunlight
• Store within an ambient temperature range of -20
℃
to +65
℃
• Store within a relative humidity rang of 10% to 85% and non-condensing
• DO NOT store in a place subjected to corrosive gasses
3.2 Installation Conditions
The operation ambient conditions are followed:
• Temperature range of 0
℃
to 50
℃
. If the ambient temperature of servo drive is greater than 45
℃
,
please install the drive in a well-ventilated location.
The ambient temperature of servo dive for long-term reliability should be under 45
℃
.
• The servo drive and motor will generate heat. If they are installed in a control panel, please
ensure sufcient space around the units for heat dissipation.
• Operation within a relative humidity rang of 10%to 93% and non-condensing
• The vibration 1g
• DO NOT mount the servo drive and motor in a location subjected to corrosive gasses or ammable
gases, and combustibles.
• Please mount the servo drive and motor to an indoor electric control cabinet without liquid and direct
sunlight
• DO NOT mount the servo drive and motor in a location subjected to airborne dust.

Moons' M2 Series Specifications

General

Brand	Moons'
Model	M2 Series
Category	Servo Drives
Language	English