Moons' M2 Series - User Manual

177 pages

Save Page as PDF

To Next Page

M2 Series AC Servo

User Manual

SHANGHAI AMP&MOONS’ AUTOMATION CO.,LTD.

Main Page

Other manuals for Moons' M2 Series

Quick Setup Guide Manual35 pages

Questions and Answers

J
Jeremy RothAug 21, 2025
What to do if Moons' Servo Drives show over voltage?
- L
  Laura PerryAug 21, 2025
  If you are experiencing an over voltage issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
J
jeffreycastroSep 4, 2025
What happens if CW limit or CCW limit is activated on Moons' M2 Servo Drives?
- S
  sandra21Sep 4, 2025
  If the CW or CCW limit is activated on your Moons' Servo Drives, there will be no change to the drive’s status.
P
paynematthewSep 2, 2025
What to do if Moons' Servo Drives show bad hall sensor?
- E
  ernestroySep 2, 2025
  If you are experiencing a bad hall sensor issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
B
Brittany BennettSep 1, 2025
What to do if Moons' Servo Drives have an internal voltage fault?
- M
  martinezrobertSep 1, 2025
  If you are experiencing an internal voltage fault with your Moons' Servo Drives, the suggested solution is to turn the servo off.
W
William TaylorAug 30, 2025
What to do if Moons' M2 Servo Drives show low voltage?
- C
  Curtis MillerAug 30, 2025
  If you are experiencing a low voltage issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
M
Martin YoungAug 29, 2025
What to do if STO is activated on Moons' M2 Servo Drives?
- M
  Michael CollinsAug 29, 2025
  If the STO is activated on your Moons' Servo Drives, the suggested solution is to turn the servo off.
P
phillipschristopherAug 27, 2025
What to do if Moons' Servo Drives show encoder error?
- L
  lynchdonaldAug 27, 2025
  If you encounter an encoder error with your Moons' Servo Drives, the suggested solution is to turn the servo off.
M
Michael MercerAug 26, 2025
What to do if Moons' Servo Drives are over temperature?
- I
  ipotterAug 27, 2025
  If your Moons' Servo Drives are overheating, the suggested solution is to turn the servo off.
T
Tonya DukeAug 25, 2025
What to do if Moons' M2 have a position error?
- H
  Heather WalkerAug 25, 2025
  If you are experiencing a position error issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.
A
alexissmithAug 23, 2025
What to do if Moons' M2 Servo Drives show over current?
- J
  John CollinsAug 23, 2025
  If you are experiencing an over current issue with your Moons' Servo Drives, the suggested solution is to turn the servo off.

Moons' M2 Series Specifications

General

Type	Servo Drives
Series	M2 Series
Control Mode	Torque, Speed, Position
Communication	CANopen
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature